Replacement Rubber Nets

Details

Replacement rubber nets.

Replacement Instructions:
• Remove two small screws in EGO grip.
• Where hoop frame exists the EGO grip - Take flat slotted screw driver and slide it between Grip and aluminum frame.
• Pry the two Grip halves apart - Apply constant pressure until two halves separate(pins on the interior will begin to "unzip").
• Remove 4 screws that hold hoop frame into aluminum core body.
• Remove hoop frame.
• Take old mesh bag off and restring hoop with new mesh bag
• Insert hoop back into aluminum core body
• Replace 4 screws( be sure not to over tighten)
• Replace EGO Grip - You will have to use some pressure to get seat closed( a small vise usually works well)
• Replace two small screws at the top of EGO Grip.