DetailsThe Wrench-n-Ride by Digger anchor is a set of two expansion plugs, designed to replace the Polaris Loc-N-Ride. The Wrench-N-Ride is used to attach the Digger Auger carrier is ATVs with composite decks.All mounting hardware is included.
FEATURES:
• Set of two expansion plugs • Replaces Polaris Loc-N-Ride • Used to attach Digger Auger Carrier to ATVs with composite decks • Can also be used to attach other accessories to ATVs with composite decks • All mounting hardware included • Made in the USA
INSTRUCTIONS:
1) Insert the rubber side of the Wrench-N-Ride expansion plugs into the holes in the deck of your ATV rack. 2) Tighten the nut on the topside of the L-Bracket until the rubber expands inside the hole of the rack. 3) After both L-Brackets are firmly secured on the composite rack place the Auger Carrier against the uprights of the L-Brackets. 4) Once placed against the uprights of the L-Brackets, mark the holes onto the carrier to be drilled. 5) Remove the Auger Carrier and drill the marked holes with a 1/4” drill bit. 6) After drilling the two holes, place the Auger Carrier against the upright angles and bolt both together with supplied bolts and lock nuts.
